Mould Making Materials
Products in: Mould Making Materials
| Image |
Description |
Price |
|
 |
Alginate Impression Material
Alginate is a very rapid rubber like material. It comes in powder form and when mixed at around 1:1 … |
£6.50
|
|
 |
Latex Rubber Liquid
Latex rubber liquid for mould making by dipping or brushing on. Requires no catalyst (sets by air dr… |
£6.50
|
|
 |
Latex Rubber Liquid 5 ltr
Latex rubber liquid for mould making by dipping or brushing on. Requires no catalyst (sets by air dr… |
£27.75
|
|
|
Latex Thickener
Latex thickener is added to the latex liquid at 1 or 2% to stop "run off" when building up… |
£0.00
|
|
 |
Low Melt Metal LM70
This Metal Melts at 70o Centigrade (less than boiling water !) Yet it is not soft when cold. I… |
£18.60
|
|
 |
Lukasil 429 Silicone Rubber
Lukasil 429 is a general purpose room temperature vulcanising (RTV) silicone rubber. It is medium/so… |
£0.00
|
|
|
Lukasil Catalyst
Lukasil Catalyst. This is SPARE catalyst for Lukasil 429 rubber only. (These rubbers are… |
£1.75
|
|
 |
Mould Natches 3/8"
Natches are for aligning the sections of plaster piece molds and make good wear resistant locators. … |
£0.65
|
|
|
P44 Addition Silicone Rubber
P44 is an addition cured silicone rubber with a hardness of 40 shore A. This rubber uses a platinum … |
£0.00
|
|
 |
Remeltable Vinyl Rubber
Re-meltable Vinyl Mould Rubber, often known as Vinamold or Gelflex etc. This material is… |
£5.00
|
|
|
Silicone Oil
Silicone Oil is a completely clear liquid used to drop the hardness and viscosity of silicone rubber… |
£5.50
|
|
|
Thixotropic Additive 429
Thixotropic (thickening) agent only for use with Lukasil 429 Silicone rubber. It is added to the rub… |
£0.00
|
|
Your basket is empty.
